These are the coding standards I am using. If you make some changes to the
code, please attempt to follow these rules.

Gershon Elber

gershon@cs.technion.ac.il

Compile with IRIT makefile/flag tools to ensure maximum warnings. Attempt
to minimize the number of warnings.
------------------------------------------------------------------------------


GENERAL
-------

Code should not exceed column 80. If the code is going to "look"
better with more that 80 columns it is allowed but should be
restricted as possible.

NESTING
-------

Nesting of all expressions is by 4 spaces. Tabs used are 8 spaces.

SPACES
------

No spaces are allowed after '(' and before ')' in a function call or
math expression. However, spaces are allowed between arguments after
the comma or between operations:

	sin(x);
	Function1(x, y, z);
	x + 5 * sin(y);

FUNCTION HEADER'S COMMENT
-------------------------

Function comments will have the following form:

/*****************************************************************************
* DESCRIPTION:								     M
* Multi line description of the function. This is a text that will be copied M
* to the programmer's manual iff the end of the line is M instead of a *     M
* like this line.							     M
*   If a V is found at the end of the line, it is copied Verbatim. Example:  M
* A x + B y + C z + D w + E = 0 defines an hyper plane in four space.        V
*									     M
*   Proper indentation will be given to algorithms or sequences that begin   M
* with an alpha-numeric values followed by a point. For example:             M
*									     M
* 1. One letter	which sets the option letter (i.e. 'x' for option '-x').     M
*    1.1 Allow even sub sequences.					     M
* 2. '!' or '%'	to determines if this option is	really optional	('%') or     M
*    it	must be provided by the user ('!').				     M
* 3. '-' always.							     M
* 4. Sequences that start with either '!' or '%'.			     M
*       Each sequence will be followed by one or two characters	which        M
*    defines the kind of the input:			   		     M
*    4.1 d, x, o, u - integer is expected (decimal, hex, octal base or	     M
*		  unsigned).						     M
*    4.2 D, X, O, U - long integer is expected (same as above).		     M
*    4.3 f - float number is expected.					     M
*									     *
* PARAMETERS:								     M
*   I1: one per line, must have an M at the end to show up in prog manual.   M
*   C2: this parameter is the second one.				     M
*									     *
* RETURN VALUE:								     M
*   int: Number of manuals to create.					     M
*									     *
* SEE ALSO:                                                                  M
*   ProgrammerManual2, ReferenceManual					     M
*                                                                            *
* KEYWORDS:	(only if a global non static function).			     M
*	ProgrammerManual, manual, documentation				     M
*****************************************************************************/
int ProgrammerManual(int I1, char C2)
{
}

Functions that are obviously auxiliary can have the postfix Aux, must be
static, and can have documentation as:

/*****************************************************************************
* DESCRIPTION:                                                               *
* Auxiliary function to function SymbPiecewiseRuledSrfApprox		     *
*****************************************************************************/
static CagdSrfStruct *CagdPiecewiseRuledSrfAux(CagdSrfStruct *Srf,
					       CagdBType ConsistentDir,
					       CagdRType Epsilon,
					       CagdSrfDirType Dir)

The function comment must be followed very precisely so they could be
grabbed out of the code directly into the programmer's manual. If you
are using the emacs editor (If you dont, you better switch to it), add
irit.el from the irit subdirectory to your .emacs. This emacs-lisp file
contains a definition for make-irit-c-function which expands a skeleton
from a given prototype. Once irit.el is installed, type
'M-x make-irit-c-function' followed by a function prototype 'int Test(char c)'.

Static functions will never have 'M' or 'V' as last character in line. Only
'*'. The 'SEE ALSO' section is recommended but optional.

INTERNAL COMMENTS
-----------------

Internal comments will be aligned to the right to column 80 if the
are commenting expression in the same line:

	i %= 2;						      /* Is i even? */

Comments that explains the following block, will be left aligned as
the block. The comment does not need to be right aligned to column 80
as well:

	/* This is a comment for the next line. */
	i %= 2;

All comments should be properly Capitalized and terminate with a point.

FUNCTION AND VARIABLE NAMES
---------------------------

Both function and variable names will have NO UNDERSCORES. Words will be
capitalized to distinguish them from each other. Variables of single
character will be lower case. Examples of valid names:

    ThisIsAFunction, VariableOne, X1, i, j

Defined types (via typedef) will hint on themselves. A type of a
structure will end with "Struct", for example CagdSrfStruct or
IPPolygonStruct. Otherwise, a name of a typedef will end with "Type". For
examples MatrixType or RealType.

STRUCTURES and UNIONS
---------------------
Structures must be typedef defined. If next and prev slots are allocated,
they must be called Pnext and PPrev respectively. If an attribute slot is
also used, it must be called Attrs.


VARIABLE'S DECLARATIONS
-----------------------
Variables will be declared at the deepest nesting possible. That is, if
a variable is used in one module, it will be static to the module. If the
variable is used in one function, it will be defined in one function. If
a variable is used in one block in one function, it will be defined in that
block. Variables will be declared static first, followed by automatic.
Variables will be declared from simple type to complex/composed ones.
Variables that are intialized are to be declared one per line, indented
once from the indentation level of the variable type. Example:

    static int
	LastCount = 0;
    static RealType
	LastValue = 0.0;
    static IPObjectStruct *TmpObj;
    char Str[LINE_LEN], *p,
	*Name = "MyName";
    int Dir = REAL_PTR_TO_INT(RDir),
	OldOrder = Dir == CAGD_CONST_U_DIR ? Srf -> VOrder : Srf -> UOrder,
	NewOrder = REAL_PTR_TO_INT(RNewOrder);
    IPObjectStruct *SrfObj;
    CagdSrfStruct *TSrf,
	*Srf = PObjSrf -> U.Srfs;

Do not use the register modifier.

PARAMETERS OF FUNCTIONS
-----------------------

Parameters of function prototypes will either be all in one line:

    int Func1Test(int Len, RealType *Vect)

or all arguments must be aligned one below the other:

    static CagdSrfStruct *CagdPiecewiseRuledSrfAux(CagdSrfStruct *Srf,
					           CagdBType ConsistentDir,
					           CagdRType Epsilon,
					           CagdSrfDirType Dir)

Local (to a file) functions must be declared static and a prototype of the
function should also be placed in the beginning of the file. Otherwise,
for a non static function, a prototype must be place in the appropriate
header ('.h' file) file.

MACROS
------

All macros that are local to a file will be defined at the beginning of
the file after the #include statements. All the names of the macros will
be in uppercase and words seperated by underscore:

#define LINE_LEN_VLONG	1024	/* Lines read from stdin/files... */
#define MIN(x, y)		((x) > (y) ? (y) : (x))


POINTERS and SLOTS
------------------
Points should be seperated before and after with a space:

    X = P -> Coords[1];

This is not the case for slots of a structure:

    X = P.Coords[1];


BLOCKS
------

Blocks starts with '{' and ends with '}'. If the block is beginning of
function then it will start with '{' at column 1 and end at column 1
with '}'. Otherwise, it will start with some expression as for/if/while
etc. in the nesting form: 

    expression {
	.
	.
	.
    }

FOR
---
	for (x = 0; x < 10; x++)

    or

	for (x = 0, i = 1;
	     x < 5;
	     x++, i--)

	The body of the for loop can never be in the same line where the ')'
    is. The ')' will be followed by '{' and the body will start in the next
    line nested 4 space deapper:

	for (....)
	    x = sin(j);
    or
	for (....) {
	    x = y / j;
	    y = j + 2;
	}

WHILE
-----
	while (x > 0)
	    x--;				       /* Better use x = 0! */

or

	while (x > 0 && y > 0) {
	    x -= 4;
	    y -= 4;
	}

or

	while (x > 0 &&
	       x < 5)
	    x /= 2;


IF
--

	if (x > 0)
	    x = -x;

or

	if (x > 0 && y > 0) {
	    x = -x;
	    y = -y;
	}

or

	if (x > 0)
	    x = -x;
	else
	    x /= 2;

or

	if (x > 0)
	    x = -x;
	else if (x < -100)
	    x /= 20;
	else
	    x /= 2;

If an if expression has an else clause both bodies will be aligned 4
space deep (The body of the if clause can not be in same line as the
if and must be aligned with the else body).


SWITCH
------

	switch (i) {
	    case 1:
		printf("1");
		break;
	    case 2:
		printf("2");
		break;
	    case 3:
		printf("3");
		break;
	    default:
		printf("Too big");
		break;
	}

GENERAL PROGRAMMING
-------------------

For portability, you should use IritMalloc, IritRealloc and IritFree
for dynamic memory maintenance. For this same reason you should also
use IritRandom/IritRandomInit and IritSleep, IritCPUTime and
IritRealTimeDate, whenever appropriate. Employ the macros defined in
irit_sm.h as much as possible.

FINAL REMARK
------------

If you are still not sure how the code should be formated in some specific
case, consult the code. Out of over 100k of lines of code, you are most
likely to find a similar case to yours.

Write your code as if it is going to become a library. Isolate and
encapsulate everything as much as possible. For modules that performs
a specific task, isolate the access to a small set of accessor
functions that have unique names using a prefix that hints on the
functionality of the module. If you must have macros and/or global
variables that are accessible to the world, make them uniquely
prefixed in a similar manner.
